AEG IKE96654FB Notice D'utilisation page 114

First set the heat setting, then set the
function.
1. Touch to activate the function or
change the time.
The timer digits
and come on the display.
and turns white.
If the timer is not set, all indicators disappear
after 4 seconds.
2. Touch or
minutes).
After 3 seconds, the timer starts to count
down automatically. The indicators
and disappear.
When the time comes to an end, a signal
sounds and flashes. To stop the signal,
touch .
To deactivate the function: touch
indicators and
to set on the display. Alternatively, set
the heat level to 0. As a result, a signal
sounds and the timer is cancelled.
CountUp Timer
You can use this function to monitor how long
a cooking zone operates.
Touch twice to activate the function.
The indicator turns red, the timer starts to
count up automatically.
To deactivate the function: touch
the indicators light up, touch
Minute Minder
You can use this function when the hob is
activated but no cooking zone operates.
To see the control panel, place a pot on a
cooking zone.
1. Touch , until the indicator
to activate the function.
2. Touch or
114 ENGLISH
and the indicators
turns red,
to set the time (00 - 99
,
stays red.
. The
come on. Use or
. When
.
turns red,
to set the time.
The function starts automatically after 4
seconds. The indicators
disappear.
When you set the function, you can remove
the pot.
When the time comes to an end, a signal
sounds and
signal.
To deactivate the function: touch
indicators
set on the display.
,
The function has no effect on the
operation of any cooking zone.
5.8 Bridge
This function connects two cooking zones
and they operate as one. You can use the
function with large cookware.
1. Place the cookware on two cooking
zones. The cookware must cover the
centres of both zones.
turns white.
2. Touch
3. Set the heat setting.
The cookware must cover the centres of both
zones but not go beyond the area marking.
, , and
stays red.
flashes. Touch
and light up. Use
to activate the function.
to stop the
. The
or to