AEG IKE96654FB Notice D'utilisation page 115

To deactivate the function, touch
cooking zones operate independently.
5.9 PowerSlide
This function allows you to adjust the
temperature by moving the cookware to a
different position on the induction cooking
area.
The function divides the induction cooking
area into three areas with different heat
settings. The hob detects the position of the
cookware and adjust the heat setting
corresponding with the position.
Use only one pot when you operate the
function.
If you want to change the heat setting, lift
up the cookware and place it on a
different zone.
• The zone indicator shows both zones in a
bridge even if only one of the zones is
used.
• You may adjust the heat setting manually
only if at least one of the zones is
activated automatically.
• You can change the heat settings for each
position separately. When you deactivate
the hob, it remembers your heat settings
and applies it next time you activate the
function.
• If you want to change the heat setting, lift
up the cookware and place it on a different
zone. Sliding the cookware can cause
scratches and discolouration of the
surface.
Touch to activate the function.
The symbol turns red and the control bar
displays the default heat setting. All cooking
zones operate for 9 minutes.
After 9 minutes, an acoustic signal sounds
and the empty cooking zones are
deactivated. Touch
function. You can move the pot or place it in a
new position.
To modify the default heat setting manually
touch the control bar and choose the
appropriate level.
. The
to resume this
• You may change the default heat setting
only if the function is active.
• You can change the default heat settings
for each position separately. When you
deactivate the hob, it remembers your
settings and applies them the next time
you activate the function.
To deactivate the function, touch
symbol turns white.
5.10 Pause
This function sets all operating cooking zones
to the lowest heat setting.
When the function operates,
be used. All other symbols on the control
panels are locked.
The function does not stop the timer
functions.
1. To activate the function: press
The symbol turns red. The heat setting is
lowered to 1.
2. To deactivate the function: press
The symbol turns white. The previous heat
setting appears.
5.11 Lock
You can lock the control panel while the hob
operates. It prevents an accidental change of
the heat setting.
Set the heat setting first.
Touch to activate the function.
The symbol turns red and blinks.
To deactivate the function, touch
symbol turns white.
When you deactivate the hob, you also
deactivate this function.
5.12 Child Safety Device
This function prevents an accidental
operation of the hob.
Activate the hob first and do not set the heat
setting.
. The
and can
.
.
. The
ENGLISH 115