Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
The dehumidifier does
not work
The humidity is not
decreasing
Unusual noises
Buttons don't work
Water in tank overflows
Error code
80
|
Instruction Manual ecoQ DryAir 20L Essential
•
The mains lead is not properly plugged in or there is no
power from the wall socket.
•
The water tank is full or incorrectly fitted.
•
The set humidity level has been reached.
•
Power plug or cord damaged.
•
The dehumidifier has not been used long enough.
•
Make sure that the doors and windows are closed.
•
The ambient temperature is too low.
•
The ambient humidity level is lower than the humidity
set.
•
The air filter frame is overly dirty.
•
Exceeded recommended room capacity.
•
The dehumidifier is tilted or standing on an uneven
surface.
•
Make sure that the air filter is clean.
•
Loose or foreign particles inside the unit.
•
Child Lock is activated, long-press child lock button,
until child lock indicator disappears from display.
•
Water tank may be damaged.
•
Float for water auto-sensor is not in place.
•
Internal drainage passage is blocked or obstructed.
•
CL: Low environmental temperature (below 5 °C).
•
CH: High environmental temperature (above 38 °C)
•
LO: Low environmental humidity (below 20%)
•
HI: High environmental humidity (above 90%)
•
E1/E2: Humidity sensor error. Contact customer care.
Publicité
