Télécharger Imprimer la page

Garmin Force Kraken Manuel De Demarrage Rapide page 7

Masquer les pouces Voir aussi pour Force Kraken:

Publicité

Les langues disponibles

Les langues disponibles

Momentary
Hold to turn on the propeller at the set speed.
propeller
Release to turn off the propeller.
control
Rotate the wheel away from you to increase the propeller
speed or cruise control speed.
Rotate the wheel toward you to decrease the propeller
Speed wheel
speed or cruise control speed.
NOTE: The speed wheel is inactive when anchor lock is on.
Push the pedal with your toes to turn the motor clockwise.
Push the pedal with your heel to turn the motor counter-
clockwise.
Steering pedal
NOTE: When anchor lock or heading hold is on, or you are
following a route, press the pedal to resume manual control
at the previous propeller speed.
Status LED
Shows the status of the foot pedal (page 7).
Quick Start Manual
Continuous
propeller
Press to turn the propeller on and off.
control
Press to set and maintain the current heading.
Press to turn off heading hold, stop the propeller, and
Heading hold
resume manual control.
TIP: You can disable this function if you prefer.
Press to turn on anchor lock. Anchor lock uses the trolling
motor to hold your position.
Anchor lock
Press to turn off anchor lock and return to the previous
steering mode.
Status Indicator
The LED on the foot pedal indicates the foot pedal status.
Illuminates green
The foot pedal is powering on.
The foot pedal is pairing. The LED turns off when it
Illuminates blue
connects to the trolling motor or the pairing process times
out without connecting.
Flashes green when
The foot pedal is connected to the trolling motor and
pushing a button
sending a command for the button being pushed.
Flashes red when
The foot pedal is not connected to the trolling motor.
pushing a button
The LED turns off when the pedal is connected to the trolling
Off
motor and not sending commands. This prolongs battery
life.
Gesture Controls
You can point or move the remote control to interact with the trolling motor.
You must calibrate the compass in the trolling motor (page 8), and the
compass in the remote control (page 9) before you can use gesture controls.
7

Publicité

loading