Garmin Force Kraken Manuel De Demarrage Rapide page 5

Hold to turn the motor off.
NOTE: By default, the trolling motor turns on automatically
when it receives power. It is not necessary to push this button
to turn it on.
Power
When the propeller is turning, press to stop the propeller.
Press three times to enter pairing mode.
Illuminates when the propeller is on.
Propeller status
Illuminates when heading hold is on.
Heading hold
status
Illuminates when anchor lock is on.
Press to turn on anchor lock.
Anchor lock
status
Hold to turn off anchor lock.
Remote Control Buttons
Quick Start Manual
Button Description
Hold to turn the remote control on and off.
Press to turn on and set the cruise control at the current speed over
ground (SOG).
Press to disable the cruise control and return to manual speed
control.
If the propeller is on, press to set it to full speed.
If the propeller is off, press to enable the propeller and set it to full
speed.
Press again to return to the previous speed and propeller state.
Press for manual control.
Hold to steer using gestures (page 8).
Press to turn the propeller on and off.
Press to navigate the menu.
When in the menu, press to select a menu item, and press to go
back.
When in anchor lock, press to jog the anchor lock position forward,
backward, left, or right in 1.5 m (5 ft.) increments.
When in heading hold or manual control, press and for single-
degree step turns, or hold for steering in five-degree increments.
Press and for incremental speed changes, or hold for contin‐
uous speed changes.
Press to turn on heading hold (set and maintain the current heading).
Press to turn off heading hold, stop the propeller, and resume manual
control.
Hold to set the heading hold by pointing the remote (page 8).
5