Garmin Force Kraken Manuel De Demarrage Rapide page 4

2 Pull the shaft back , and then raise the motor slowly.
3 Slide the motor into the motor catch until it locks in the stowed position
Updating the Software
You should update the trolling motor software for the best performance.
Use the ActiveCaptain app on your compatible smartphone to download
®
and install software updates on the trolling motor.
See the online owner's manual for more information (page 10).
Operation
You can use the remote control, the foot pedal, a compatible Garmin
chartplotter, or a combination of these devices to operate the trolling motor.
In general, most of the instructions provided for the remote control also apply
to a connected chartplotter. For specific chartplotter instructions, see the latest
owner's manual for your chartplotter.
NOTE: Some features available when using the remote control and chartplotter
are not available when using the foot pedal only.
4
Trolling Motor Display Panel
The display panel on the trolling motor mount shows important information at a
glance.
Shows the motor speed level.
.
Speed
Green: the motor battery voltage is good.
Yellow: the motor battery voltage is low.
Trolling motor
battery status Red: the motor battery voltage is critically low.
Green: the motor has a good GPS signal.
Yellow: the motor has a poor GPS signal.
GPS signal status
Red: the motor does not have a GPS signal.
Green: the motor is operating normally.
®
Red (solid): the motor software is starting up.
Red (blinking): there is a system error.
Motor status Blue: the motor is in pairing mode.
Yellow: the motor is in recovery mode (for software updates
and recovery procedures).
Quick Start Manual