Garmin Force Kraken Manuel De Demarrage Rapide page 6

Button Description
Press to turn on anchor lock. Anchor lock uses the trolling motor to
hold your position.
When in anchor lock, press to turn off anchor lock and return to the
previous steering mode.
Hold to jog the anchor lock position by pointing the remote
(page 8).
Press to open the menu.
Press to exit the menu.
Press to mark a waypoint.
Press to open the shortcut for the Garmin chartplotter assigned to
1 through 4
1
the button.
Remote Control Screen
1
Requires a connection to a compatible Garmin chartplotter. See your chartplotter owner's manual for instructions.
6
Shows the operational status of the trolling motor.
For example, when in manual control, Manual is shown, and when the
heading hold is on, Heading Hold is shown, along with the heading-hold set
point in degrees.
Shows the trolling motor battery status.
Green: the motor battery voltage is good.
Yellow: the motor battery voltage is low.
Red: the motor battery voltage is critically low.
TIP: You can view the remote control battery level by pressing
Shows the status of the propeller.
When the propeller icon is shown, the propeller is on. When the propeller
icon is not shown, the propeller is off.
Shows the GPS signal strength of the trolling motor.
Shows the speed level of the propeller.
PROP
NOTE: When using the cruise control feature, this field is replaced with
SOG Shows the measured speed over ground (SOG) in the specified units.
Foot Pedal
You can use the foot pedal to operate the trolling motor.
.
.
Quick Start Manual