Quattro General Information; Devices & Options References; Installation - Analog way QUATTRO Manuel Utilisateur

QUATTRO

1-4. QUATTRO GENERAL INFORMATION

QUATTRO by Analog Way is High Resolution Analog Computer & Video Up/Down Scaler Switcher. It is fitted with
4 Universal A/V inputs including and 1 analog output. It performs an ultra fast and smooth transition between any
Video or Computer sources.
The device is a High Performance State of the Art Up/Down Video and Computer Scaler. Ready to fit the native
resolution of the latest HD display devices, it provides a high quality image thanks to its high quality digital decoder,
improved 3:2 and 2:2 pull down circuitry, auto-adaptative pixel by pixel 3D motion compensation, time base corrector,
frame rate converter & follower.
Easy to use, the device offers Auto Setup function, Auto Clock and Phase for Computers. Each input image control -
brightness, contrast, color, hue, processing, aspect ratio, zoom, etc ... - can be individually set and stored in nonvolatile
memories. Each of the 4 Inputs is fitted with a stereo audio line. The audio can either follow or break away from the
Video image. The device is fitted with a Dual RS232 Com port for Integral remote control and automatic control of
other devices in the installation. Full Firmware upgrade maintains high value to your equipment through permanent
additional possibility in the apparatus life time. Upgrades are available on Analog Way web site. An optional TCP/IP
connection allows far away remote and/or upgrade.
This ultra compact and user friendly device is especially dedicated to high resolution A/V presentation displays,
conference and boardrooms, and events.
1-5. DEVICES & OPTIONS REFERENCES
REFERENCE
QTD402
QTA401
OPT-LAN

1-6. INSTALLATION

IMPORTANT:
• Table Top Mounting: The device can be used directly on a table: the unit is equipped with 4 plastic feet.
• Rack Mounting:
IMPORTANT:
QUATTRO D.
QUATTRO
LAN communication port (optional).
Please read all the safety instructions (pages 3 to 5) before starting.
The device is compatible with a 19" enclosure. To install the device into a 19" rack: Attach the
device to the rack by using 4 screws in the front panel holes (screws are not included).
• The openings in the rear and side panels are for cooling. Do not cover these openings.
• Be sure that no weight is added to the device in excess of 2 kg (4.4 lbs.).
• The maximum ambient operating temperature must not exceed 40°C (104°F).
• The rack and all mounted equipment in it must be reliably grounded to national and
local electrical codes.
Chapter 1 : INTRODUCTION (continued)
DESIGNATION
PAGE 9