Inputs #1*, 2 To 4 Description; Outputs Description; Dvi Output - Analog way QUATTRO Manuel Utilisateur

QUATTRO

2-4. INPUTS #1*, 2 to 4 DESCRIPTION

CONNECTION:
You can connect to these inputs one of the following source:
• A composite video source.
NOTE: The input #4 (input #3 on the QTA401) can accept a composite video source on its BNC connector.
• A S.VIDEO source.
NOTE: The input #4 (input #3 on the QTA401) can accept a S.VIDEO source on its BNC connectors.
• A Component video source.
• A HD-YUV source.
• A RGBS video source.
• An analog computer source (RGBHV, RGsB, RGBS).
HD15 PIN ASSIGNMENT:
SIGNAL COMPUTER (analog)
PIN 1 RED.
PIN 2 GREEN.
PIN 3 BLUE.
PIN 6 RED return.
PIN 7 GREEN return.
PIN 8 BLUE return.
PIN 10 GND.
PIN 13 H sync or C sync (S).
PIN 14 V sync.
AUDIO SOURCE:
-You can connect an unbalanced stereo audio source on a jack 3.5 connector (input #1).
-You can connect an unbalanced stereo audio source on a MCO connector (input # 2 & 3).
-You can connect an unbalanced or balanced stereo audio source on a MCO connector (input #4).

2-5. OUTPUTS DESCRIPTION

ANALOG OUTPUT:
You can connect to this output an analog display device.

DVI OUTPUT**:

You can connect to this output a digital display device only.
DVI-I PIN ASSIGNMENT:
Pin Function
1 TMDS Data 2-
2 TMDS Data 2+
3 TMDS Data 2 Shield
4 Not used.
5 Not used.
6 DDC Clock
DDC Data
7
8 Analog Vertical Sync.
Not used
C1
C2 Not used
C3 Not used
C4 Not used
C5 Not used
DDC = Display Data Channel.
TMDS = Transition Minimized Differential Signal.
* QTA401 only.
** QTD402 only
VIDEO RGB/S
RED. Cr / Pr.
GREEN. Y.
BLUE. Cb / Pb.
RED return. Cr / Pr return.
GREEN return. Y return.
BLUE return. Cb / Pb return.
GND.
C sync (S).
Pin Function
9 TMDS Data 1-
10 TMDS Data 1+
11 TMDS Data 1 Shield
12 Not used.
13 Not used.
14 + 5V (Power)
Ground for (+5V)
15
16 Hot plug detect.
YUV & HD-YUV S.VIDEO (Y/C)
C (chrominance).
Y (luminance).
C return.
Y return.
HD15 female connector of the device.
Pin
Chapter 2 : STARTING (continued)
COMPOSITE VIDEO
VIDEO (NTSC, PAL...)
return.
1
5
10
6
15
11
Function
17 TMDS Data 0-
18 TMDS Data 0+
19 TMDS Data 0 Shield
20 Not used.
21 Not used.
22 TMDS Clock Shield
TMDS Clock+
23
24 TMDS Clock-
PAGE 15