Functions Description - Analog way QUATTRO Manuel Utilisateur

Chapter 4 : FRONT PANEL DISPLAY MENUS DESCRIPTION (continued)

4-5. FUNCTIONS DESCRIPTION

1 [SWITCHING] + ENTER.
1-1 [Output rate]
Select an item with
• [Internal rate]: The output frame rate can be 50 Hz to 75 Hz depending of the selected output format. A
• [Follow # x]:
2 [INPUT] + ENTER.
2-1 [Auto settings] + ENTER.
This function detects automatically the input type of each source connected to the inputs.
2-2 [Input status] + ENTER.
Indicates the status of the selected input.
2-3 [Input type] + ENTER.
Select an input with
Select the input signal type with
• [SDTV Composite]
• [SDTV S.VIDEO]
• [SDTV YUV]
• [SDTV RGBS TTL]
• [Computer DVI]
• [HDTV]: HDTV input format (720p, 1035i and 1080i).
• [Audio only]: Select this function if you only want to connect an audio source (no video signal needed).
Then for [SDTV Composite], and [SDTV S.VIDEO], select the video standard with
• [NTSC / PAL / SECAM]: automatic NTSC, PAL, and SECAM standard detection.
• [NTSC]: NTSC standard detection only.
• [NTSC 4.43 60 Hz]: NTSC 4.43 60Hz detection.
• [SECAM]: SECAM standard detection only.
2-4 [Used input] + ENTER.
Select an input and then select an item
• [Used]: A signal is connected to the input.
• [Unused]: No signal is connected to the input. The input is unused.
2-5 [H sync load] + ENTER.
Select for each input the load of the H Sync. with
2-6 [VCR mode] + ENTER.
This function allows improving the image contour of low quality VHS tapes. Select [on] with ENTER.
2-7 [VIS] + ENTER.
This function allows defining the sources which are synchronized together (external genlock). The synchronized
sources can be seamless switched between themselves. This switching mode is called VIS (Vertical Interval
Switching).
PAGE 20
+ ENTER.
higher frame frequency gives a better visual aspect when displaying static pictures.
The output frame rate is identical to the selected input Frame Rate: 50 Hz if the input video
standard is PAL or SECAM and 59.94 Hz if the input video standard is NTSC. This function
allows improving the motion pictures.
+ ENTER.
+ ENTER between:
+ ENTER between:
• [SDTV RGB SOG]
• [SDTV RGBS ana.]
• [Computer SOG]
• [Computer HV/C]
• [PAL]: PAL standard detection only.
• [PAL 4.43 60Hz]: PAL 4.43 60Hz detection.
• [B & W 50/60 Hz]: Black and White detection.
+ ENTER.
QUATTRO
+ ENTER between: