Chapter 4 : Front Panel Display Menus Description; Introduction; Control Buttons; Status Mode - Analog way QUATTRO Manuel Utilisateur

Chapter 4 : FRONT PANEL DISPLAY MENUS DESCRIPTION

4-1. INTRODUCTION

The front panel display menu presents 2 modes: the STATUS MODE and the CONTROL MODE.
• The STATUS MODE indicates the input and output status of the device.
• The CONTROL MODE allows selecting and adjusting the parameters of the device.

4-2. CONTROL BUTTONS

The front panel display is controlled by 2 buttons and 1 knob:
knob:
EXIT / MENU button:
ENTER button:

4-3. STATUS MODE

When switching ON, the front panel display shows the following information:
Device model
Device version.
Selected input number.
Format, line & frame frequency of the selected input.
Output format.
Switching mode & output frame rate.
PAGE 18
• In the CONTROL MODE, turn this knob to scroll thru the different menus.
• In the STATUS MODE, press this button to enter in the CONTROL MODE.
• In the CONTROL MODE, press this button to:
- return to the previous menu without safeguarding the selection.
- return to the STATUS MODE (press several times).
• From the STATUS MODE, press this button to enter in the CONTROL MODE.
• From the CONTROL MODE, press this button to confirm a selected item.
QTD402
Version _._
Input: 1
XGA 60.1K / 60Hz
Output: 1024x768
Intern rate 75Hz

DEVICE STATUS

INPUT STATUS

OUTPUT STATUS

QUATTRO