Chapter 2 : Starting; Quattro D Connections; Quattro Connections - Analog way QUATTRO Manuel Utilisateur

QUATTRO

Chapter 2 : STARTING

2-1. QUATTRO D CONNECTIONS

NOTE: Turn OFF all of your equipment before connecting.
Connect the AC power supply cord to the QTD402 and to an AC power outlet.
Connect your computer & video sources to the 4 universal inputs of the QTD402.
• If you need to connect a digital computer source, use the input #1 (DVI-I IN connector).
• Connect your others sources to the unused inputs.
IMPORTANT: Connect only one source by input.
Connect your display device (projector, plasma screen...) to the HD15 or DVI-D connectors.
Turn ON the QTD402 (rear panel switch). Then turn ON all your input sources and then your display device.
• Connection diagram:
4
1

2-2. QUATTRO CONNECTIONS

NOTE: Turn OFF all of your equipment before connecting.
Connect the AC power supply cord to the QTA401 and to an AC power outlet.
Connect your computer & video sources to the 4 universal inputs of the QTA401.
IMPORTANT: Connect only one source by input.
Connect your display device (projector, plasma screen...) to the OUTPUT connector.
Turn ON the QTA401 (rear panel switch). Then turn ON all your input sources and then your display device.
• Connection diagram:
4
1
2 2
2 2
3
3
3
ANALOG WAY
ANALOG WAY
PAGE 13