Input #1 Of The Quattro D Description - Analog way QUATTRO Manuel Utilisateur

Chapter 2 : STARTING (continued)

2-3. INPUT #1 OF THE QUATTRO D DESCRIPTION

CONNECTION:
You can connect to this input one of the following source:
• A composite video source.
• A S.VIDEO source.
• A Component video source (YUV).
• A HD-YUV source.
• A RGBS video source.
• An analog (RGBHV, RGsB, RGBS) computer source.
NOTE: You can use the DVI / HD15 adaptor provided with the device to connect analog sources on the DVI-I (IN)
connector.
• A digital computer source.
DVI-I PIN ASSIGNMENT:
The DVI-I female connector of the device can be used with digital signals as well as analog signals. The table
hereafter explain the pin assignment of this connectors.
Pin Function
TMDS Data 2-
1
2 TMDS Data 2+
3 TMDS Data 2 Shield
Not used.
4
5 Not used.
6 DDC Clock
DDC Data
7
8 Analog Vertical Sync.
C1 Analog Red video (or Cr / Pr or C)
Analog Green Video (or Y or composite video)
C2
C3 Analog Bleu Video (or Cb / Pb)
C4 Analog Horizontal Sync (or composite sync)
Analog Common Ground Return
C5
DDC = Display Data Channel.
TMDS = Transition Minimized Differential Signal.
AUDIO SOURCE:
You can also connect an AUDIO stereo source on jack 3.5 connectors.
PAGE 14
Pin Function
TMDS Data 1-
9
10 TMDS Data 1+
11 TMDS Data 1 Shield
Not used.
12
13 Not used.
14 + 5V (Power)
Ground for (+5V)
15
16 Hot plug detect.
Pin Function
TMDS Data 0-
17
18 TMDS Data 0+
19 TMDS Data 0 Shield
Not used.
20
21 Not used.
22 TMDS Clock Shield
TMDS Clock+
23
24 TMDS Clock-
8
1
9
16
17
24
QUATTRO
C1 C2
C5
C3 C4