SilverCrest SNAW 1000 D2 Mode D'emploi page 14

NOTE
► The memory can store up to 99 measurements. After this, no further meas-
urement can be saved and "M99" flashes on the measured value memory
display r. If you want to save further measurements, you can delete the
saved data by pressing the MC button 5. The M99 display goes out.
Note that by pressing the MC button 5, all previously stored measured
►
values are deleted.
► If the total for a saved nutritional or energy value exceeds the maximum
value, the display 3 will show "0-Ld " . "ΣM" and the two digits of the last
operation flash to indicate that no further measurements can be stored.
The following maximum values apply:
Displaying added measured values
You can call up added measured values at any time.
1) Press the MR button 6. The totals of all saved measured values appear on
the display for about 10 seconds.
2) If you do not press any other button for about 10 seconds, the scales will
return to weighing mode.
Deleting measured values
Press the MC button 5 if you wish to delete the saved measured values.
The display of the last weighing number goes out and all measured values are
deleted.
SNAW 1000 D2
Weight
PROT (Proteins)
FAT
CARB (carbohydrates)
BE (bread units)
KJ (kilojoules)
KCAL (kilocalories)
CHOL (cholesterol)
99.999 kg / 99:15.9 lb'oz / 999.95 oz
9999.9 g/ 352.73 oz
9999.9 g/ 352.73 oz
9999.9 g/ 352.73 oz
999.99
99999
99999
9999.9 g/ 0.352 oz
GB │ IE │ NI │
11 ■