SilverCrest SNAW 1000 D2 Mode D'emploi page 11

First use
■ Remove all packaging materials from the appliance. Remove the protective
film from the display 3. The transport restraint that prevents the weighing
platform 1 from being pushed down must be removed from under the
weighing platform 1.
Open the battery compartment 2 on the underside of the scale and remove
■
the small plastic strip from between the batteries and the contacts, then close
the battery compartment 2 so that the battery compartment cover clicks into
place.
■ The scales can display weights in g (grams) and kg (kilograms) or in oz
(ounces) and lb (pounds). Press the UNIT button 8 to change the weight
unit. The examples in these instructions always use the unit g (grams).
Setting up
Place the scales on a level, firm surface. Correct measurement requires a firm
base, as the weight sensors are installed in the 4 silicone feet.
NOTE
► This appliance is provided with non-slip silicone feet. Furniture surfaces may
be made of a variety of materials and are treated with many different types
of cleaning agents. Therefore, it is not possible to entirely exclude the pos-
sibility that some of these materials contain substances that could corrode
and soften the appliance's silicone feet. If need be, place an anti-slip mat
under the silicone feet of the appliance.
Operation
Weighing items
1) Press the ON/OFF button 9 to switch on the scales.
The start display appears briefly, then "0 g" is shown automatically.
CAUTION
Excess or incorrect loads will cause irreparable damage to
the appliance.
► Never place food weighing more than 5 kg (11 lb) on the weighing
plate
scales.
► Do not place any objects or food on the display
■ 8 │ GB │ IE │ NI
. In cases of doubt, first weigh heavy food using more sturdy
or the buttons.
SNAW 1000 D2