Télécharger Imprimer la page

ULTIMATE SPEED USKT 60 C3 Traduction Du Mode D'emploi D'origine page 10

Publicité

Les langues disponibles

Les langues disponibles

In hot weather, do not leave the device in a car. This could perma-
nently damage the device.
The device becomes warm during use. There is a risk of burn injuries
from touching the hot surfaces.
Take care to ensure that sand, dust and other small foreign objects
cannot enter the air inlet or air outlet openings.
Do not operate the device near to fl ammable liquids or gases.
Do not use the device to draw in hot fumes. Failure to do so risks
causing a fi re or explosion!
Switch the device off and remove the mains plug from the socket in
the following cases:
if you are not using the device;
if you are leaving the device unsupervised;
if you are doing cleaning work;
if the connection cable is damaged;
if foreign objects have got into the device or you notice unusual
noises.
Only use the accessories supplied and recommended by the manu-
facturer.
Do not dismantle or modify the portable compressor.
This device must only be repaired by a maintenance technician.
Do not use the device in areas with a risk of explosion, e.g. near
fl ammable liquids, gases or powders.
Do not expose the device to any source of heat.
Do not store in places where the temperature can exceed 70 °C.
Only charge in an ambient temperature between 0 °C and 40 °C.
Only use the USB cable
cigarette lighter USB adapter
This helps prevent device damage and possible personal injuries
that could result from it:
CAUTION! How to avoid accidents and injuries resulting from
electric shock:
Electrical safety:
Do not use the device if the switch cannot be switched on and off.
Arrange for damaged switches to be replaced.
Do not carry the device by the cable. Do not unplug the plug from
the socket by pulling on the cable. Protect the cable from heat, oil
and sharp edges.
If the cable is damaged, unplug the plug immediately from the
socket.
10
GB/IE/NI
supplied with the device or a 12 V
18
.
17

Publicité

loading