MINN KOTA RAPTOR Manuel D'instructions page 17

CLEARING PAIRED RAPTORS FROM THE FOOT SWITCH
The Foot Switch was designed so that all paired Raptors can be cleared from memory.
1
a. Press and hold the Up
button on the Foot Switch at the same time until all of
the LED's at the top of the Foot Switch begin to scroll.
Then release the buttons. The Foot Switch will go into
Pairing Mode for 30 seconds. Once Pairing times out
all Raptors will be cleared.
Putting the Foot Switch into Pairing Mode,
NOTICE:
even if it is accidental, without Pairing the Foot
Switch to a Raptor will clear all paired Raptors.
©2024 Johnson Outdoors Marine Electronics, Inc.
CLEARING PAIRED RAPTORS FROM THE FOOT SWITCH
button and the Down
Anchor Mode
Selection LED
Auto Up Button/
Pairing Button
Raptor Foot Switch
Raptor Selection
Indicator LEDs
Auto Down
Button/Pairing
Button
minnkota.johnsonoutdoors.com | 17