Atag ES1011QAM Notice D'utilisation page 66

USE
Operation
GB 6
Switching extraction on and off
• Press the '+' button (8).
The cooker hood will switch on at the lowest setting.
• Press the '+' button (8) again to set a higher extraction setting.
Press and hold the '+' button (8) for 2 seconds to select the highest
setting (boost) (see switching on intensive setting).
The extraction setting can be set between speeds 1 to 4 or 9
(depending on the model).
• Press the '-' button (2) to select a lower setting.
The extraction setting is indicated in the display (5).
• If the extraction setting is set at 1, you can switch off the cooker
hood by quickly pressing and releasing the '-' button (2).
• To switch off the cooker hood from whatever setting press and hold
the '-' button (2) for at least 2 seconds.
Alter the number of speed-settings (models with 9 speed-settings)
You can choose between 9 speed-settings (standard) or 5 speed-settings.
• Press and hold the '-' button (2) and '+' button (8) for at least 5 seconds.
This selects the 5 speed-setting option. Press and hold the '-'
button (2) and '+' button (8) again for at least 5 seconds to select
the 9 speed-setting option.
Switching the lighting on and off
• Quickly press and release the lighting button (1).
The light switches on at maximum strength.
• Press and hold the lighting button (1) to set the lighting strength.
The lighting changes from maximum to minimum strength and
vice versa.
Switch on intensive setting:
• Press and hold the '+' button (8) for approximately 2 seconds.
The intensive setting (setting 'P') is switched on for ten minutes
(depending on the model). The display will flash (5) during this period.
The original extraction setting will be reactivated after this period.
• Quickly press and release the '+' (8) button to switch off the
intensive setting.