Husqvarna Soff-Cut 4000 Manuel D'utilisation page 57

maintenance schedule and the operator's manual for the
engine.
Introduction
WARNING:
maintenance work you must read and
understand the safety chapter.
Maintenance
Do a check for fuel and oil leakage.
Do a general inspection.
Examine the engine oil level.
Examine the hydraulic oil level.
Clean the blade and blade block guard *.
Clean the product.
Examine the controls.
Examine the blade block guard*.
Examine the cutting blade.
Examine the floating side cover.
Examine the skid plate.
Examine the fuel level.
Examine the wheels.
Clean the spark plug.
Examine the air filter and replace if it is nec-
essary.
56
Maintenance
Before you do any
Every
use
X
X
X
X
Maintenance schedule
The maintenance intervals are calculated from daily use
of the product. The intervals change if the product is not
used daily.
For maintenance marked with * see instructions in
Safety devices on the product on page 45 .
Weekly Monthly
Daily
(50 h)
X
X
X
X
X
X
X
X
X
X
X
Annually After the
first 20 h,
then
(200 h)
each 100
h
794 - 001 - 19.04.2022