Husqvarna Soff-Cut 4000 Manuel D'utilisation page 54

3. Lift up the lever to disengage the parking brake.
4. Align the front pointer (A) and the kerf guide (B) with
the line where you will cut.
B
5. Pull the throttle control up fully.
Note:
Always operate the engine at full engine
speed for maximum capacity.
794 - 001 - 19.04.2022
6. Push on the front part of the cutting depth switch to
lower the blade.
7. Use the cutting depth pointer to make sure you have
the correct cutting depth.
A
Note:
There are 2 cutting depth marks for different
dimension of blades.
53