Publicité
Les langues disponibles
Les langues disponibles
29
3.6.6 Wireless Setting
1. On system setting screen, select "Wireless" to enter wireless setting screen,
as shown in Figure 3-29.
2. Press the Navigation Key to turn on or turn off the wireless function.
3. Press "
OK" button to save setting and return to the upper level menu screen.
Downloading the APP software for smart phone
The terminal devices such as smart phone can be used to receive data from the
Easy ECG Monitor in real-time, and store the received data, review the stored
data as well.
You have to download the corresponding APP software on the smart phone.
For terminal devices with the Android system, please follow the procedure to
download:
1. Install an APP software for scanning QR Code by smart phone, such as
QuickMark, I-Nigma, Bee Tagg etc..
2. Run the APP software to scan the QR Code image in below figure, please
focus the QR Code frame while scanning.
3. If successful scanned, then the scanning result, that is a web link for
downloading the APP software "ViHealth" will be displayed on the smart
phone.
4. Open this web link by a web browser to download the APP
software "ViHealth". Install this APP software if successful downloaded.
For terminal devices with the iOS system (such as iPhone, iPad),
please follow this procedure to download:
1. On the App Store of the device, enter "ViHealth" into the
search line.
Note: if you use an iPad to search, please select "iPhone only"
when searching.
2. Once the search results are listed, select the result with icon
"
", then download the corresponding APP software.
Instruction for Measurement
Make sure the APP software is successful to connect with the
Easy ECG Monitor.
Refer to the manual of this APP software for detail operating.
Note: APP software for PC and Android smart phone
is also available for download from below link:
http://www.creative-sz.com
3.6.7 Resume Default
1. On system setting screen, select "Default setting" to enter into default setting
screen, as shown in Figure 3-30.
2. Choose "YES" or "NO" with Navigation Key. If the choice is "YES", then press
"
OK" button, all the parameter settings will resume default settings.
Return" button to back to upper level menu.
3. Press "
3.6.8 Version Info
On system setting screen, select "Version" to enter version information screen, as
shown in Figure 3-31. "V52-10-10" is version number(refer to the actual version).
3.7 Help
On main menu screen, select "Help", then press "
info screen. It provides different kinds of illustrations for ECG measuring methods.
Refer to Section 3.2.1 for ECG measuring methods in details.
ENGLISH
OK" button to enter help
Figure 3-28 Measure Mode Setting
Figura 3-29 Selezione Wireless
Figure 3-30 Default Setting
Figur3 3-31 Version information
Publicité
