Publicité
Installation
1. Location
Install the machine so that it is not directly exposed to the rays of the sun or the rain.
(Risk of damage to the smart card and the product).
2. Installation
Install the machine in a place as described below :
(1)Flat surface (slope of less than 3 degrees),
(2)Surface capable of bearing the weight of the machines,
(3)Location not liable to impede pedestrian traffic or create an obstacle
(Make sure to observe fire, road and traffic regulations),
(4)Lock the caster wheels,
(5)Attach the machine with a rope or chain,
(6)Do not install in a place where the machine could overturn.
3. Assembly of the machine
When you assemble the machines, please follow the instruction book and screw firmly into place.
In the event of missing parts or assembly screws, do not use the machine before informing BANDAI and obtaining the missing
items.
4. Checking
After installing or moving the machines, make sure :
(1)That the machine is stable,
(2)That the door, the capsule exit and the handle work properly,
In the event of problems, refrain from using and inform operator.
5. Products
Make sure not to fill the machine with products other than those of BANDAI as this may lead to malfunctioning since capsule
sizes vary from one manufacturer to another.
6. Redéeoration
Do not redecorate without our permission.
7. Destruction of the machines
Do not destroy the machines illegally.
Have the machines destroyed according to the regulations by those responsible therefor.
• We decline all liability for any defects or incidents arising in connection with the machines should you fail to observe the
above instructions.
Machine Superintendance
1. Appoint
a person to be responsible for the machines at the different locations.
Establish between the operator and the location who is to be in charge of the machines at the different locations.
When doing so, please check observance of the following points.
2. Machine installation site
The place where you install the machines should be the property of the shop in which you install them.
When you install the machines, make sure they are installed inside the property.
The place where you install the machines should be flat. (slope of less than 3 degrees).
3. Lock
Make sure to lock the machines when you install them.
4. Empty Capsules
Provide a dustbin: empty capsules can cause accidents.
5. Keeping watch over the machines at night
Move the machines back inside the shop if you install them outside during the day.
6. Routine inspection of the machines
Every day, make sure that the machines are safely installed and ensure that they are preiodically inspected and maintained.
7. Malfunctions
In the event of any malfunctioning, stop using the machine as soon as possible and do not return to service until repaired.
(Determine who is responsible for maintenance of the machines).
13
Publicité
