RIDGID R4514T Manuel D'utilisation page 25

ASSEMBLY
TO CLOSE/OPEN THE LEG STAND
See Figures 27 - 32.
 Remove any workpieces from the tool.
 Remove and securely store any tools or accessories such
as rip fence, miter gauge, clamps, blade guard, etc.
 Lower the saw blade.
To close the leg stand:
 At the same time, step on the release lever, grasp the
grips, and lift the grips up and away from the body.
 Continue lifting up on the grips until the release lever
clicks and locks into place.
RELEASE
LEVER
To move the leg stand:
 Holding the grips firmly, pull grips toward you until the
leg stand and saw are balanced on the wheels.
 Push the saw to the desired location then either open
the leg stand for saw operation or store the saw in a dry
environment.
Fig. 27
25 − English
Fig. 28
Fig. 29