Dexcom G7 Mode D'emploi page 4

Receiver setup
1. Insert sensor
• You must insert your sensor before pairing to the receiver.
• For instructions go to Inserting Sensor in the sensor box.
2. Set up receiver
• Press the Select button for 3-5 seconds to turn on sensor before pairing.
• After inserting and pairing, follow local guidelines for throwing out the applicator and recycling the
Dexcom packaging.
3. Sensor warmup
Sensor warmup timer tells you when you'll start getting readings and alerts.
4. Your sensor session
Go to Using Your Receiver in the receiver box and the online User Guide at
dexcom.com/en-ca/downloadsandguides to find out more.
10:30 50%
No Alerts
Sensor Warmup
27:00
remaining
Your sensor is now warming
up. No sensor readings or
alerts until warmup is done.
Menu