Publicité
Les langues disponibles
Les langues disponibles
2 Preparation
a) Before use, check the supply and extension cord for
signs of damage or aging. If the cord becomes damaged
during use, disconnect the cord from the supply immedi-
ately.
DO NOT TOUCH THE CORD BEFORE DISCONNECTING
THE SUPPLY.
Do not use the machine if the cord is damaged or worn.
b) Before use, always visually inspect the machine for
damaged, missing or misplaced guards or shields.
c) Never operate the machine while people, especially
children, or pets are nearby.
3 Operation
a) Keep supply and extension cords away from cutting
means.
b) Wear eye protection and stout shoes at all times while
operating the machine.
c) Avoid using the machine in bad weather conditions
especially when there is a risk of lightning.
d) Use the machine only in daylight or good artificial
light.
e) Never operate the machine with damaged guards or
shields or without guards or shields in place.
f) Switch on the motor only when the hands and feet are
away from the cutting means.
g) Always disconnect the machine from the power supply
(i. e. remove the plug from the mains remove the disabling
device or removable battery)
GAR_09884-20.961.02_2024-07-04.indd 15
GAR_09884-20.961.02_2024-07-04.indd 15
– whenever the machine is left unattended,
– before clearing a blockage,
– before checking, cleaning or working on the machine,
– after striking a foreign object,
– whenever the machine starts vibrating abnormally.
h) Take care against injury to feet and hands from the
cutting means.
i) Always ensure that the ventilation openings are kept
clear of debris.
4 Maintenance and storage
a) Disconnect the machine from the power supply
(i. e. remove the plug from the mains remove the disa-
bling device or removable battery) before carrying
out maintenance or cleaning work.
b) Use only the manufacturer's recommended replace-
ment parts and accessories.
c) Inspect and maintain the machine regularly. Have
the machine repaired only by an authorized repairer.
d) When not in use, store the machine out of the reach
of children.
5 Recommendation (for mains powered
machines and those with an integral charger)
The machine should be supplied via a residual current
device (RCD) with a tripping current of not more than
30 mA.
15
04.07.24 11:17
04.07.24 11:17
Publicité
