Télécharger Imprimer la page

Canon SureShot 60 Zoom Mode D'emploi page 71

Publicité

Troubleshooting
y_
Before taking your camera to be repaired, check the table
below.
Problem
Cause
Remedy
Page
The battery
check indica¬
tor 0 blinks.
• The battery has
expired.
• Change the battery.
22
The battery
• No battery loaded.
• Load a battery.
22
check indica-
• The battery is inserted
• Reinsert the battery cor-
22
tor i is not
displayed.
with the wrong polari¬
ty.
rectly.
• The battery has com¬
pletely expired.
• Replace the battery.
22
The shutter
• The mode dial is set
• Choose the mode suit-
does not
release.
on OFF.
able tor the subject or
place you are shooting.
• The battery has
expired.
• Replace the battery.
• The him is not loaded
properly.
• Reload the film correctly.
• A rewound film is
loaded in the camera.
• Remove the lilm and
load a new one.
• When the red-eye
reduction lamp is lit.
• Keep pressed until the
shutter is released.
the shutter will not
release tor approx. 1
second.
Change the Hash mode.
The pictures
■ When the shutter was
• Make sure the AF light
33
are blurry.
released, the AF light
emitter and receiver
were blocked
emitter and receiver are
not blocked by hair, lin¬
gers. etc.
• During self-timer pho¬
tography, you pressed
the shutter button
while standing imme¬
diately in front of the
camera.
• Make sure you are not
standing directly in front
ol the camera.
65
• The camera was
moved when the shut¬
ter button was pressed
(camera shake).
• Press the shutter button
gently.
32
"E" is dis-
• This is a self-diagnosis
• Turn otf then turn on the
26
played on the
display when reset is
camera. (If the display
LCD panel.
necessary.
remains, take the cam¬
era to be repaired.)
73

Publicité

loading