Publicité
Les langues disponibles
Les langues disponibles
C
Useful information
Troubleshooting
CAUTION
Before troubleshooting, disconnect the power supply. Only
a qualified electrician of competent person must do the
troubleshooting that is not in this manual.
IMPORTANT
There are some sounds during normal use (compressor,
refrigerant circulation).
Problem
Appliance does not
work
The food is too
warm.
Appliance cools too
much
Possible cause
Temperature regulation knob is
set at number "0".
Mains plug is not plugged in or
is loose
Fuse has blown or is defective
Socket is defective
Temperature is not properly
adjusted.
Door was open for an extended
period.
A large quantity of warm food
was placed in the appliance
within the last 24 hours.
The appliance is near a heat
source.
Temperature is set too cold.
22
Set the knob at other number to
switch on the appliance.
Insert mains plug.
Check fuse, replace if
necessary.
Mains malfunctions are to be
corrected by an electrician.
Please look in the initial
Temperature Setting section.
Open the door only as long as
necessary.
Turn the temperature regulation
to a colder setting temporarily.
Please look in the installation
location section.
Turn the temperature regulation
knob to a warmer setting
temporarily.
EN
Solution
Publicité
