Publicité
Les langues disponibles
Les langues disponibles
Chapter II
2.
DESCRIPTION
2.1.
Selector switch
This measuring instrument is a professional benchtop multimeter, capable of measuring the
following quantities (accessed by the 9-position rotary selector switch):
* AC voltages with AC (or RMS) capacitive coupling,
* AC voltages with AC+DC (or TRMS) direct coupling,
* DC voltages,
* AC currents with AC (or RMS) capacitive coupling,
* AC currents with AC+DC (or TRMS) direct coupling,
* DC currents,
* resistance values,
* sound continuity,
* capacitance,
* diode threshold voltage,
* frequencies,
* duty cycles,
* dBm,
* temperature
2.2.
Keypad
2.2.1.
Keypad
A nine-key keypad lets you :
* select the autoranging mode (RANGE key)
* store a value (MEM key)
* measure fast peaks (Pk +/- key)
* set the measurement relative to a reference value (REL key)
* select a function derived from the main function (SEL key)
* select time-domain measurements: frequency, duty cycle, (Hz key)
* select survey mode to detect minimum, maximum or average value (SURV key)
* enlarge analog display (ZOOM key)
* activate sending data to a printer (PRINT key)
2.2.2.
Switching on and off
Switching on and off the instrument by pushing a double-press key.
2.3.
Display
The display shows :
* clearly legible figures (20 mm high).
* a readout of the parameter being measured through a 34-segment bargraph.
* perform 50 000-point measurements (high resolution).
* perform 5 000-point measurements (low resolution).
2.4.
Power supply
The multimeter is powered directly from the mains either 110 V or 230 V, 50 Hz or 60 Hz.
The mains plug is located at the rear panel of the instrument.
2.5.
Measurement input terminals
Measurements are performed using two measuring leads supplied with the instrument
connected to input terminals 1, 2, 3 and 4, as indicated in § 3.1.
Benchtop multimeter
31
Publicité
