Publicité
Les langues disponibles
Les langues disponibles
WARNINGS
- The hob must be installed by a qualified professional. Never perform the
operation yourself.
- The hob is not installed directly above a dishwasher, refrigerator, freezer, washing
machine or dryer, as moisture can damage the unit's electronics.
- The hob must be installed in order to maximize the thermal radiation and thus the
functioning of the unit.
- The wall above the surface of the plate and the embedding materials must
withstand the heat.
Before installing the hob, make sure that:
● the work surface is level and that no structural members interfere with the required spaces.
● the worktop is made of a heat resistant material.
● the plate is installed above an oven, the oven has an integrated cooling fan.
● the installation conforms to applicable standards and regulations.
● proper switch providing full disconnection from the power supply is integrated in the permanent wiring,
mounted and positioned to comply with local installation rules and regulations.
● The switch must be of an approved type and provide a gap contact separation of 3 mm in all poles (or
all live conductors [stage] if local wiring rules allow this change in requirements)
● the customer can easily access the switch once the hob installed
● using materials resistant to heat and easy to clean (eg. Tiles) for the surfaces of the walls surrounding
the cooking area.
If in doubt about installing and regulations, check with local authorities.
III. INSTALLATION
EN-13
Publicité
