Publicité
Les langues disponibles
Les langues disponibles
6.2.4.2 Entering the limit values by weighing
Important information !
Always begin by entering the lower limit value, followed by the upper limit
value.
Operation
1. Use the
key to switch the balance
on.
Set to tolerance weighing:
Press the
key until [L. SEt] appears
and then release.
2. The tolerance mark
The lower limit value can be set.
Place a sample for the lower (i.e. small-
er) limit value on the weighing plate:
Store using the
key. The stored lower
weight value is displayed briefly.
Entry is now completed if 1 tolerance
mark was selected in the basic setting
(see chap. 7.2.1).
EW/EG-N-e-1728
ο
-
will flash [
].
M
M
Display
0 I I I F
0.000
g
L. SEt
0.000
g
93.835
g
41
Publicité
