KERN EW-N Serie Mode D'emploi page 72

5.2 Unpacking
Carefully remove the balance from its packaging, remove the plastic wrapping and
position the balance in its intended working location.
5.2.1 Installation
Use the foot screws to level the balance until the air bubble in the bubble level is in
the prescribed circle.
5.2.2 List of items supplied
Standard accessories:
(1) Balance
(3) Weighing plate bracket
(5) Interface connector set
(7) Mains adaptor
14
(2) Weighing plate
(4) Windbreak
(6) Operating instructions
EW/EG-N-e-1728