Aastra 5360ip Guide D'utilisation Rapide page 5

Forwarding Calls
1. Press Foxmenu >
M
.
LECT
2. Select the type of forwarding
3. Select the destination (user
4. Enter the call number and validate.
Reset call forwarding with Foxmenu >
A F
CTIVATED EATURES
Deflecting a Call During the Ringing Phase
1. Press Foxmenu >
D
phase.
2. Enter the call number and press Foxmenu >
2
.
OK
Transferring During a Call
1. Press the Call key or Foxmenu >
enter the call number and wait until the called
party answers.
2. Press Foxmenu >
C
is transferred. If no-one answers, cancel with
2
/
E R
ND CALL ECOVER
call.
Brokering
Switches between two callers without interrupt-
ing the calls. You are making/taking a call:
1. Press Foxmenu >
E
number and wait until the call is answered.
2. Press Foxmenu >
B
and forth between the callers.
Conference Call
Connects several callers for a conference call. You
are making/taking a call:
1. Press Foxmenu >
E
number and wait until the call is answered.
2. Press Foxmenu >
C
3. Add other callers using Foxmenu >
1
again.
CALL
Leaving a conference call: Press the End key.
Callback
The person is busy or does not answer: Foxmenu
> .
C
ALLBACK
Resetting activated features
You can deactivate again all the call forwardings
and other temporarily active functions: Press
Foxmenu > >
M A
ENU
and / the function you want.
R D
ESET ELETE
Installation and Connection
You can set up the phone either at a 40° or a 25°
angle:
1. Insert the footstand as indicated on the instal-
, then
F
ENU ORWARDING
1
.
2
/subscriber
M
ENU
> > /
S R D
ELECT ESET ELETE
during the ringing
EFLECT
E
NQUIRY CALL
2 3
/ ; the call
T
ONNECT RANSFER
3
and take back the first
, enter the call
NQUIRY CALL
to switch back
ROKERING
, enter the call
NQUIRY CALL
.
ONFERENCE
E
NQUIRY
>
F
CTIVATED EATURES
lation diagram until it snaps into place.
2. Plug in the handset and phone cords and feed
>
S -
E
them through the cable holders.
Notes
3
). • Some function commands of the vocal
announcements
then minal.
. • Always install the footstand before you plug in
the cables.
• Always remove the cables before you detach
the footstand.
Connections
,
Document Designation
• Document number: eud-0987 / 1.2
• Valid as of: Aastra 5000 R5.1 / Aastra 400 Series
as of R1.0 / Aastra IntelliGate® Series as of I7.7
• Copyright © 09.2010 Aastra Technologies Limited
Declaration of Conformity, User's Guide and oth-
er documents can be found at
www.aastra.com/docfinder
www.aastra.com
S
ELECT
3
are not to apply on this ter-
Connecting to the IP network
(Aastra 5360ip only)
Connecting the power supply
(Aastra 5360ip only)
Telephone connection cable
(Aastra 5360 only)
Connecting the handset
2
or
3
.