Publicité
Les langues disponibles
Les langues disponibles
V1.0
• The impact wrench may wrench the user's arm causing muscle or
joint injuries
• The tool may strike bystanders.
• Kickback can also damage the tool or workpiece.
Kickback can be avoided by taking proper precautions:
1.
Maintain a firm grip on the tool and position your body and arms to
allow you to resist a kickback. Kickback will propel the tool in the
direction opposite the impact socket's direction of rotation. The tool
may pull out of your grasp.
a.
Use clamps or a vice to hold down smaller workpieces.
2.
Only use an impact socket designed for the tool.
3.
Maintain control of a long workpiece or large panel by placing
supports under the material on either side of the impact wrench.
AIR TOOL PRECAUTIONS
1.
Use only clean and dry compressed air as a power source.
Contaminated or moist air will gradually damage the tool.
2.
Install an in-line shutoff valve or regulator to allow immediate
control over the air supply in an emergency, even if a hose is
ruptured.
3.
Discontinue tool use if it does not work properly or air is leaking.
Tag or mark the tool as 'defective' or 'out of service' until repaired.
4.
Check the manufacturer's maximum pressure rating for air tools
and accessories. Compressor outlet pressure must be regulated
to never exceed the maximum pressure rating of the tool (see
Specifications). Exceeding the maximum PSI rating can create a
bursting hazard, causing injury and property damage.
a.
The tool does not regulate the pressure level. The power
output is in direct proportion to the air pressure available. An
external air pressure regulator is required to safely use this
tool.
5.
Attach all accessories properly to the tool before connecting the air
supply. A loose accessory may detach or break during operation.
6.
Never use oxygen, combustible gas or any other bottled gas as
a power source. Any power source other than an air compressor
could cause an explosion and serious personal injury.
7.
Turn OFF the valve and discharge any remaining air pressure after
each use or before adjusting the tool.
Page 7
IMPACT WRENCH
www.princessauto.com / 1-800-665-8685
9136854
Publicité
