Publicité
Les langues disponibles
Les langues disponibles
9136854
CAUTION!
NOTICE!
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean,
well-lit and free of distractions. Place lights so you are not working
in a shadow.
2.
Keep anyone not wearing the appropriate safety equipment away
from the work area.
3.
Store unused tools properly in a dry, safe and secure location to
prevent rust, damage or misuse.
4.
Do not install or use in the presence of flammable gases, dust or
liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved
by the Canadian Standards Association (CSA) or American
National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side
protection for the eyes. Eye protection equipment should comply
with CSA Z94.3-07 or ANSI Z87.1 standards based on the type of
work performed.
2.
The tool may contain high pressure. Use safety glasses and gloves
for protection during operation. Keep hands clear of the exposed
rubber portions of the hose.
3.
The air source used with this tool may cause hearing damage.
Wear ear protection gear to eliminate or reduce the noise.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid
personal injury or damage to tool.
1.
Do not operate any tool when tired or under the influence of drugs,
alcohol or medications.
2.
Avoid wearing clothes or jewelry that can become entangled with
the moving parts of a tool. Keep long hair covered or bound.
www.princessauto.com / 1-800-665-8685
IMPACT WRENCH
This notice indicates a potentially hazardous situation that may result in
minor or moderate injury if proper practices are not taken.
This notice indicates that a specific hazard or unsafe practice will result in
equipment or property damage, but not personal injury.
V1.0
Page 4
Publicité
