Publicité
Les langues disponibles
Les langues disponibles
V1.0
the tool for approximately 30 seconds to ensure the oil is evenly
distributed throughout the tool. Store it in a clean and dry location.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant
to the steel parts to avoid rust. Remove the lubricant before using the
tool again.
1.
Components should be kept dry, with machined surfaces lightly
oiled.
2.
Always remove the impact socket and store in a safe place.
3.
Never store equipment in a wet/damp environment.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
AIR TOOL
Problem(s)
Tool runs at
normal speed, but
loses power under
load.
Page 13
IMPACT WRENCH
Possible Cause(s)
1.
Motor parts worn.
Suggested Solution(s)
1.
Have a qualified technician service
the tool.
2.
Replace tool or parts.
www.princessauto.com / 1-800-665-8685
9136854
Publicité
