Horizon Hobby Blade 150 FX RTF Manuel D'utilisation page 13

but are not designed to withstand the rigors of shipping without
additional protection. Ship via a carrier that provides tracking and
insurance for lost or damaged parcels, as Horizon is not respon-
sible for merchandise until it arrives and is accepted at our facility.
An Online Service Request is available at http://www.horizonhobby.
com/content/service-center_render-service-center. If you do not
have internet access, please contact Horizon Product Support to
obtain a RMA number along with instructions for submitting your
product for service. When calling Horizon, you will be asked to
provide your complete name, street address, email address and
phone number where you can be reached during business hours.
When sending product into Horizon, please include your RMA
number, a list of the included items, and a brief summary of the
problem. A copy of your original sales receipt must be included
for warranty consideration. Be sure your name, address, and RMA
number are clearly written on the outside of the shipping carton.
NOTICE: Do not ship Li-Po batteries to Horizon. If you have
any issue with a Li-Po battery, please contact the appropriate
Horizon Product Support office.
Warranty Requirements
For Warranty consideration, you must include your original
sales receipt verifying the proof-of-purchase date. Provided
warranty conditions have been met, your Product will be serviced
or replaced free of charge. Service or replacement decisions are at
Warranty and Service Contact Information
Country of Purchase
Horizon Service Center
(Repairs and Repair Requests)
Horizon Product Support
United States
(Product Technical Assistance)
of America
Sales
Horizon Technischer Service
European Union
Sales: Horizon Hobby GmbH
FCC Information
FCC ID: 2AVDQ-ESKY008083
Supplier's Declaration of Conformity
Blade 150 FX RTF (BLH4400)
This equipment complies with FCC and IC radiation
exposure limits set forth for an uncontrolled
environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator
and/or antenna and your body (excluding fingers, hands, wrists,
ankles and feet). This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
This device complies with part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
Horizon Hobby
servicecenter.horizonhobby.com/RequestForm/
productsupport@horizonhobby.com
877-504-0233
websales@horizonhobby.com
800-338-4639
service@horizonhobby.eu
+49 (0) 4121 2655 100
the sole discretion of Horizon.
Non-Warranty Service
Should your service not be covered by warranty, service
will be completed and payment will be required without
notification or estimate of the expense unless the expense
exceeds 50% of the retail purchase cost. By submitting
the item for service you are agreeing to payment of the service
without notification. Service estimates are available upon request.
You must include this request with your item submitted for ser-
vice. Non-warranty service estimates will be billed a minimum of
½ hour of labor. In addition you will be billed for return freight.
Horizon accepts money orders and cashier's checks, as well as
Visa, MasterCard, American Express, and Discover cards. By
submitting any item to Horizon for service, you are agreeing to
Horizon's Terms and Conditions found on our website http://www.
horizonhobby.com/content/service-center_render-service-center.
ATTENTION: Horizon service is limited to Product compliant in the
country of use and ownership. If received, a non-compliant Product
will not be serviced. Further, the sender will be responsible for
arranging return shipment of the un-serviced Product, through a
carrier of the sender's choice and at the sender's expense. Horizon
will hold non-compliant Product for a period of 60 days from
notification, after which it will be discarded.
Contact Information
any interference received, including interference that may cause
undesired operation.
CAUTION: changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
13
10/15
Address
2904 Research Rd
Champaign, Illinois, 61822 USA
Hanskampring 9
D 22885 Barsbüttel, Germany
EN