Publicité
Les langues disponibles
Les langues disponibles
3. Turn the key ignition switch to "ON" and then to "START", release once the
engine has started.
NOTE: If the engine does not start up within 3 or 4 seconds, release the key
ignition and wait for a few seconds before trying again to avoid overheating the
ignition switch.
4. Once started, change slowly the choke lever completely to right (open air
position). The engine will begin working stably and is ready to have equipment
plugged in.
.
NOTE: Do not leave the choke in an intermediate position, the blend would
be too rich and the engine would not work properly.
During the first startup of the machine the battery's charge may be low if stored for
too long. If the charge is not sufficient, start up the equipment manually. The
battery is recharged automatically while the generator is running.
44
Publicité
