Publicité
The manufacturer INTERPUMP GROUP S.p.A. – Via E. Fermi, 25 – 42049 S. ILARIO D'ENZA (RE) – Italy
DECLARES under sole responsibility that the product identified and described as follows:
Name:
Pump
Type:
Reciprocating plunger pump for high pressure water
Trademark:
INTERPUMP GROUP
Series:
SS1
Model:
SS1B1505 SS1B1507 SS1B1509 SS1B1511 SS1B1513 SS1B1514 SS1C1509
SS1C1511 SS1C1513 SS1C1515 SS1B1503 SS1B1506
complies with Machinery Directive 2006/42/EC.
Standards applied: UNI EN ISO 12100:2010 - UNI EN 809:2009
The pump identified above meets all the essential safety and health protection requirements as listed in
section 1 of Annex I of the Machinery Directive:
1.1.1 - 1.1.2 – 1.1.3 – 1.1.5 – 1.1.6 - 1.3.1 – 1.3.2 – 1.3.3 – 1.3.4 – 1.5.4 – 1.6.1 – 1.7.1 – 1.7.2 – 1.7.4 – 1.7.4.1 –
1.7.4.2
and the relevant technical documentation has been compiled in accordance with Annex VII B.
In addition, the manufacturer undertakes to make available, following a reasoned request, a copy of the
relevant technical pump documentation in the manner and terms to be defined.
The pump should not be put into service until the plant to which the pump is to be incorporated has been
declared in accordance with the provisions of the relevant directives and/or standards.
Person authorised to compile the technical file
Person authorized to draw up the declaration:
Reggio Emilia /2020
DECLARATION OF INCORPORATION
(In accordance with Annex II of European Directive 2006/42/CE)
Name: Maurizio Novelli
Address: INTERPUMP GROUP S.p.A. – Via E. Fermi,
25 – 42049 S. ILARIO D'ENZA (RE) – Italy
Name : Mr. Silvio Corrias
Signature:
12
Publicité
