IR QE5-15A Guide D'informations page 8

2.5.2 Inspecting / Replacing the Air Intake Filter
1. Unscrew and remove the wing nut (A) securing the filter
housing (B) to its base (C).
2. Remove the filter housing and withdraw the old filter element
(D). Clean the element with a jet of air or vacuum.
3. Replace the filter element and housing, securing it in place with
the wing nut previously removed.
Figure 2-2 Air Filter
EN-8
RELEASED 02/Nov/2023 21:18:09 GMT
2.5.3
The compressor should be blown off with properly filtered
compressed air at the given intervals (do not aim the compressed
air at people), especially.
•
•
•
•
•
General Maintenance and Cleaning
WARNING
•
Danger when cleaning system parts with
compressed air: Small parts propelled at high speed
by compressed air can penetrate the skin or destroy
an eye.
•
Do not aim the compressed air at people.
CAUTION
•
Fire hazard from oil residues.
Controller components
Fittings
Compressor
Cooler
Electric motor
47794361 Rev.A