ZUMEX MINEX Manuel De L'utilisateur page 34

CLEANING
Zumex recommends cleaning the machine at least once or twice a day, depending on
how much it is used in order to maintain optimal food hygiene conditions.
The following are the steps for correctly cleaning the juice extractor:
1
With the machine stopped, unplug it from the mains by pulling out the pin (not
the cable).
2
Dismantle the front cover (Fig. 8).
3
Dismantle the unit composed by twirler blade and support (Fig. 9) turning
the selector clockwise to position
For more thorough cleaning, separate the parts as follows:
• After removing the unit from the machine, turn the selector to position to
remove the blade block.
• To remove the twirler blade, move the blade to a vertical position until the
mark on the blade and support coincide. In this position it should come away
easily.
closed
dismantling
Blade lock
positions
and pull gently towards you.
open
Dismantling the
tipping blade
Warning! Handle this part with
care to avoid cuts. The support,
twirler blade and blade block unit
must always be assembled and
dismantled as one piece.
33