Publicité
Les langues disponibles
Les langues disponibles
W 590 Flexio
4. Description/ Scope of delivery
1) Nozzle
3) Union nut
5) Wall Extra I-Spray spray attachment
7) Air volume control
9) Air filter cover
11) Trigger
13) Container
15) Ventilating hose
17) Feed hopper (2 pcs.)
19) Standard spray attachment
21) Lubricating grease*
* This is inside the container: remove it before starting operations!
5. Field of application
Many different coating substances can be processed with the W 590.
A different spray attachment must be used, depending on the coating substance:
Coating Materials
Low-viscosity coating substances:
Low-viscosity coating substances:
Water- and solvent-based paints, finishes,
primers, 2-component paints, clear
finishes, automotive finishes, staining
sealers and wood sealer-preservatives.
Interior wall paint (dispersions and latex
paint)
6. Coating Materials Suitable for Use
Interior wall paint (dispersions and latex paint)
Water- and solvent-based paints, finishes, primers, 2-component paints, clear finishes,
automotive finishes, staining sealers and wood sealer-preservatives.
Description/ Scope of delivery (Fig. 1)
2) Air cap (to set the working direction)
4) Spray jet width adjustment
6) Material volume adjustment
8) Spray gun rear part
10) ON/OFF switch (located on both sides)
12) Mains lead
14) Valve
16) Stirring rod
18) Practice poster
20) Replacement nozzle seal (Standard
spray attachment)*
22) Lubricating grease*
Spray attachment
Standard
Wall Extra I-Spray
EN
25
Publicité
