Operating Components; Handling And Operation; Preparing The Appliance; Switching The Appliance On / Off - Powerfix Profi PTSI 9 A1 Mode D'emploi

Operating components

GB

Handling and operation

In this chapter you will receive important information for the
handling and operation of the appliance.

Preparing the appliance

The appliance is ready for use after inserting the battery.
Grasp the handle of the appliance so that the index fi nger can
operate the measuring button
the buttons
handers.
Switching the appliance on / off
♦
♦
♦
40
Laser-beam exit opening
Infrared sensor
Display
Button
Button °C/°F/SET
Button
Battery compartment
Measuring button
- . The appliance is suitable for left and right
Press the measuring button
The display lights up and a brief signal tone is heard.
Press and hold the button ° C /° F/SET
to switch the appliance off . Two brief signal tones will be heard.
If the appliance is not currently in use, the back light of the
display switches off after approx. 15 seconds. After ap-
prox. 60 seconds the appliance switches off automatically,
two short signal tones notify this.
and the thumb can operate
to switch the appliance on.
for approx. 3 seconds
PTSI 9 A1