GENERGY CUBE 2 Serie Instructions D'utilisation page 88

 The connected 230V equipment are not working:
YES
Check if the plugged
equipment is malfunctioning.
Is the thermal protection in
the "OFF" position?
NO
Does the voltmeter or multimeter voltage in 230V socket?
NO
Possible causes to check in this order
Loose cable or connector
Brushes in poor condition
Damaged voltage
regulator.
If the engine still doesn't generate,
get in touch with our support
service:
spv@genergy.es
YES
Place it in the "ON" position
Visually check the
equipment and control
panel wiring.
Replace brushes
Replace the voltage
regulator.
87