GENERGY CUBE 2 Serie Instructions D'utilisation page 55

4. Checks prior to operation
4.1 Battery connection (only electrical models with electrical startup).
Before charging the electrolyte and
connecting the battery, check that the
engine switch is in the "OFF" or "0"
position.
If you have any
identifying the engine switch, check
chapter 3.1 PANEL CONTROL.
Loosen the support fastening bolts for
the battery, extract and connect the
the negative terminal.
positive terminal is supplied connect
from factory.
NOTE: Check the polarity of the cables, connect the red (+) cable to the red
(+) terminal of the battery and the black (-) cable to the negative (-) of the battery.
NOTE: Be careful not to make any undesired contacts with the battery
terminals and cables, between them or against a metal part of the machine.
questions on
Normally
54
BATTERY TERMINALS
FASTENING BOLTS