GENERGY CUBE 2 Serie Instructions D'utilisation page 86

2. Place an appropriate container under the oil draining hole to collect the drained
gasoline.
3. Using a screwdriver, loosen the carburetor draining screw. Gasoline will begin
streaming from the carburetor draining hole. Once all of the gasoline is drained,
tighten the draining screw again.
OIL DRAINING
DRAINING SCREW
4. Remove the spark plug (see point 10.3 of this manual) and pour some clean
motor oil (10 ~ 20 ml) in the cylinder. Pull the startup handle gently, this will make
the engine spin and distribute the oil. Then install the spark plug again.
STARTUP HANDLE
5. Pull the starter rope slowly until you feel resistance. In this point, the piston is
rising in its compression stroke and the admission and exhaust valves are closed.
This position helps protecting the engine against internal corrosion.
85