Publicité
Les langues disponibles
Les langues disponibles
4.2 Transport kit assembly
Pass the screw (1) across the wheel axle, in the other side place a washer (2).
Pass the screw across the frame hole and fix in the other side with a nut (3).
According below picture assembly the rubber foot, check carefully draw due to
there are 2 different types of foot according different models:
If you wish use handle, go
up the handle and then fix
it with the pin connection
in the hole frame (see
image on the right). The
handle
must
have
a
vertical and perpendicular
position in relation to the
generator.
55
Publicité
