Bushnell H2O 157050R Manuel D'utilisation page 2

Porro Design
Sku's:157050R,
158042R,134218R,
134211R,134212R
F
Folding Roof Prism (FRP) Design
Sku's:138005R, 132105R
F
Thank you for purchasing your new Bushnell® H2O™ binoculars.
This manual will help you optimize your viewing experience by explaining how you can adjust the binocular to your eyes,
and how to care for this instrument. Read the instructions carefully before using your binocular.
NEVER LOOK DIRECTLY AT THE SUN WITH YOUR BINOCULAR, AS IT MAY CAUSE SERIOUS
DAMAGE TO YOUR EYES
EYECUP ADJUSTMENT
Your Bushnell H2O binocular is fitted with eyecups that provide a comfortable view of the full image and help to exclude
extraneous light. If you need to wear glasses when using binoculars, leave the eyecup in the "down" position (Fig. 1, next
page). For use without eyeglasses or sunglasses, twist up the eyecups (Fig. 2). This will place your eyes farther from the
binocular's ocular lenses, at the correct eye relief distance, allowing you to see the full field of view.
IPD (INTERPUPILLARY DISTANCE) ADJUSTMENT
The spacing between the pupils of your eyes, called "interpupillary distance," varies from person to person. To match your
binoculars to your IPD or "eye to eye" width:
1. Point them at a white wall or blank area of the sky. Hold the binoculars and view through them as you normally would.
Don't worry about focus yet.
2. Grasp each side of the binocular firmly. Move the left and right sides closer together or farther apart (Fig. 3, next
page) until you see a single image with no shaded areas.
2
A
D
A
E
C
B
B
C
E
Roof Design
Sku's: 150142R, 130105R
D
F
PARTS GUIDE
Ocular Lens
Diopter Adjustment Ring
Eyecups
Tripod Adapter Socket*
Center Focus Knob
Objective Lens
* under cap (not available on FRP models)
A
E
B
A
B
C
D
E
F
C