Publicité
Les langues disponibles
Les langues disponibles
Usage
Filtration of exhaust gases/smells
The cover is equipped with an electrostatic ionization system, which ionizes gas particles (smell).
Intervention into this system may be done by professional staff only.
Inserting and changing the carbon filter
The carbon filter consists of two charcoal-filled cassettes, mounted left and right to the suction
opening of the engine. For mounting please check picture.
To mount the carbon filter, please take the following steps:
1. First remove the metal grease filters
2. Place the charcoal filter on both sides of the motor.
3. Then reinsert the grease filter
The matching carbon filter for this model is called G 266 x 96
Metal grease filter
The aforementioned grease filters are in front of the engine and ensure the absorption of greasy
ingredients from the kitchen haze. The cleaning can be done in the dishwasher. It is recommended to
do this all 14 days (at least once a month). Too long cleaning intervals lead to a blockage of the filter
and thus reduced power.
Cleaning in the dishwasher
The grease filters of your hood are dishwasher safe (55 ° C). However, light discoloration of the metal
can arise. These have no influence on the function of the grease filter and are not considered a
reason for complaint. Put the filters loosely in the dishwasher. Do not bend or pinch them. NOTE: Do
not clean very dirty grease filters together with other dishes.
Cleaning by hand
Publicité
