Instructions for safety and environment
to plug in the product again after
unplugging.
Do not overload the refrigerator.
Objects in the refrigerator may fall
down when the door is opened,
causing injury or damage. Similar
problems may arise if any object is
placed onto the product.
If the product has a door handle, do
not pull the handle when re-locating
the product. The handle might be
loose.
Be careful not to jam your hand or
any other body part in the moving
parts of the refrigerator.
Do not put your hand or any other
foreign materials into the ice
machine while it is operating.
1.1.1 Hydrocarbon (HC) Warning
If your product's cooling system
contains R600a:
This gas is flammable. Therefore, pay
attention not to damage the cooling
system or the piping during use and
transportation. If damaged, keep
the product away from potential fire
sources that may cause it to catch
fire and ventilate the room where the
product is placed.
If the product is damaged and
if you see gas leak, please
C
keep away from the gas. It may
cause frostbite when it gets into
contact with the skin.
(including R134)
Ignore this warning if the cooling
C
system of your product contains
R134a.
Refrigerator / User Manual
Type of gas used in the product
C
is stated on the type plate which
is on the left wall inside the
refrigerator.
WARNING:
A
Never throw the product into fire
for disposal.
1.1.2 For Products with a Water
Dispenser/Ice Machine
Pressure for cold water inlet shall
be maximum 90 psi (620 kPa).
If your water pressure exceeds
80 psi (550 kPa), use a pressure
limiting valve in your mains
system. If you do not know how to
check your water pressure, ask for
the help of a professional plumber.
If there is a risk of water impact
in your installation, always use a
water impact protection equipment
in that installation. Please consult
professional plumbers if you are
not sure if there is water impact in
your installation.
Do not make installation on the hot
water inlet.
Use drinking water only.
Take the necessary measures
against the freezing risk of the
hoses. The water temperature
operating range must be 0.6°C
(33°F) minimum and 38°C
(100°F) maximum.
5 /28EN