Publicité
Les langues disponibles
Les langues disponibles
7. Administration
Filter
Filter allows you to control which ports are displayed in the Port
Selection List, as well as which ports are scanned when Auto Scan
Mode is invoked. When you click Filter, the bottom of the panel
changes to look similar to the figure, below:
All – with no other filter options selected, lists all of the ports on the
installation.
• Putting a check mark in the Powered On checkbox lists only the
ports that have their attached devices powered on.
• The text input box and Search button allow you to key in a search
string so that only port names that match what you key in show
up in the list.
The chart below describes the attributes that are listed for each port.
Attribute
Description
Port Number
The KVM switch port that the computer or KVM is connected to
Port Name
If a port is assigned a name, it is displayed here
Device Name
The name of the KVM switch that the port is on
Status
Current status of the computer or KVM connected to the port; Online or Offline
A Connect icon will be located underneath the port list. Highlight a port and click Connect to open up a remote session with the
Connect
selected port displayed.
Note: When accessing the KVM via web browser, this page can be sorted by any attribute by clicking on the column header.
Port Level
When a port is selected in the Sidebar tree, the Connections sub-
section will display port connection and configuration options.
The chart below describes the sections that are displayed on this page.
Section
Description
This displays the Port Status; whether it is online or offline, and whether virtual media can be mounted to it. Click on the Connect
Status
button to open a remote session with the selected port displayed.
Each port can have additional ports associated with it, so that the user can access multiple ports via one connection page.
Associated Links can be added/removed from the Port Configuration sub-section (see Port Configuration section under OSD
Associated Link
Operation for details). When ports are available in the Associated Link section, simply highlight one and click the Connect button to
open a remote session with that port displayed.
( continued )
Interactive Display Panel
The Connections sub-section will display port status information on
the Device Level and port connection and configuration options at
the Port Level.
Device Level
When a KVM switch is selected in the Sidebar tree, the Connections
sub-section will display a list of the ports that are accessible to the
logged-on user.
36
Publicité
